Most leaks on the roof can be avoided. With regular inspections, most roof problems can be easily identified. Some steps are taken today to ensure the best shape of the roof. Below are some of the reasons why your roof is leaking. If you notice any of them, it’s best that you contact a roofing expert right away.
1. Broken shingles
If your home is just like most, your roof might have shingles. Leaks occur when there are broken, bent, and missing shingles. If you see shingle debris in your yard or driveway, then you might have a problem. You may also find patches on your roof, which is also a sign of leaking.
2. Water pools or ponding
You might soon have a major problem with the water pools on your roof after the rain. You must fix this problem right away. As roofers know, ponding leaves your roof vulnerable to rotting, which can cause all sorts of problems such as leaks. This problem isn’t much of a problem for steep roofs. It is commonly seen on flat and low-lying roofs. To correct the problem, call a roofing contractor as soon as possible. You must get your roof fixed from the surface. But after a leak on your roof, it should be easier to repair any water damage problem.
3. Gutter problems
Clean your gutters frequently used to prevent roof issues and side runoffs. If the gutters are damaged or blocked, it cannot function properly. When that happens, the surfaces of the building will have a lot of water and moisture, thus increasing the likelihood of leakage. Clean your gutter with a trowel to remove leaves and other debris. Look for rusty or broken gutters which can lead to line problems. Repeat twice a year, ideally in autumn and spring.
4. Flashing and skylight issues
Wherever the roof is fitted with joints, there’s a possibility of leakage. Unfortunately, making roles on your roof is necessary because it’s where the shutters, fireplace, and pipes go. The contractor must drill your roof properly if you intend to install skylights and solar panels. By using transparent metal called jackets, safeguard these joints. But if the flashing starts to bend or get damaged, then, it may expose your home to leaks. Hire a roofing contractor to get it fixed.
How to Fix Leaks
One way to detect leaks is to inspect your roof. If you find broken or moldy insulation, rotating or spreading panels, or discolored metal sheets, you may have a problem on your hands. You must contact a roofer immediately when you see these signs. They should tell you what’s wrong with your roof and advise you on what to do next.
During the heavy weather, you may have ice dam issues if you’re living in regular ice and snow regions. This is usually done after a snowfall, with the snow melted over your roof. In addition to this, ice can cover ribs and prevents water from flowing when it hits the cold roof edges. Ice dams could be very dangerous to your roof.
Recent Comments